Wet Mix Macadam Plant

Product Details:

Technical Specification:

Additional Information:

• Item Code: FAB-WMM-200
• Production Capacity: FABHIND WMM-200
• Delivery Time: 2 WEEK
• Packaging Details: LOOSE TRUCK AND TRAILER

Product Details:

(1) four bin feeder.

* bin size : - 3000 mm * 2250mm

* bin feeder belt : - 2920 *500* 08 mm = 4 nos

* bin feeder motor : - 2 hp. Ac motor = 4 nos.

* drive gear : - d: 20:1 = 4 nos.

* gathering gear : - d: 20:1 = 1 nos.

* gearthing motor : - 5 hp. = 1 nos.

* gearthing belt : - 600*25500* 8 mm 1 nos.

* one bin vibrate motor : - 1 hp. = 1 nos.

* thickness plate : - 4 mm sheet.

* bin extention plate thickness : 3 mm sheet

(2) vibrating screen.

* screening area. : 900mm * 1200mm.

* screening size. : 65mm * 65 mm * 8 mm.

* vibrator motor. : 1 hp motor.

(3) salinger conveyor set.

* conveyer belt size : 14400 * 600 * 08 mm

* motor : 5 hp ac / 1500 rpm.

* gear box : d: 5:1 gear.

* length : 45 f

(4) pug mill unit.

* pug mill plate thicknes : - 05 mm

* pug mill liner plate. : - 08 mm

* reduction gear : - 9 * 10: 1

* pug mill motor : - 50 hp / 1500 rpm

* padester : - ucf – 218

* chakker : - 54 * 21 = 1 set.

* pedalam tips : - 26 x 2= 52

* water pump : - 1. 5 h p

(5) load out conveyor set.

* conveyer belt : - 32,000 * 600 * 3ply.

* motor : - 10 hp motor

* gear box : - d: 20:1

* length : - 53 ft

* power pack set. : - 2 h. P power pack.

* gob hopper cap. : - 20 tons silo

(6) control cabin

* cabin size : - 6. 5 * 8 ft

Product Details:

1) FOUR BIN FEEDER.

* Bin Size : - 3000 MM * 2250MM

* Bin Feeder Belt : - 2920 *500* 08 MM = 4 Nos

* Bin Feeder Motor : - 2 HP. AC Motor = 4 Nos.

* Drive Gear : - D: 20:1 = 4 Nos.

* Gathering Gear : - D: 20:1 = 1 Nos.

* Gearthing Motor : - 5 HP. = 1 Nos.

* Gearthing Belt : - 600*25500* 8 mm 1 Nos.

* One Bin Vibrate Motor : - 1 HP. = 1 Nos.

* Thickness Plate : - 4 mm Sheet.

* Bin Extention Plate Thickness : 3 mm Sheet

(2) VIBRATING SCREEN.

* Screening Area. : 900mm * 1200mm.

* Screening Size. : 65mm * 65 mm * 8 mm.

* Vibrator Motor. : 1 HP Motor.

(3) SLINGER CONVEYER SET.

* Conveyer Belt Size : 14400 * 600 * 08 MM

* Motor : 5 HP AC / 1500 RPM.

* Gear Box : D: 5:1 Gear.

* Length : 45 F

(4) PUG MILL UNIT.

* Pug Mill Plate Thicknes : - 05 mm

* Pug Mill Liner Plate. : - 08 mm

* Reduction Gear : - 9 * 10: 1

* Pug Mill Motor : - 50 HP / 1500 RPM

* Padester : - UCF – 218

* Chakker : - 54 * 21 = 1 Set.

* Pedalam Tips : - 26 X 2= 52

* Water Pump : - 1.5 H P

(5) LOAD OUT CONVEYER SET.

* Conveyer Belt : - 32,000 * 600 * 3Ply.

* Motor : - 10 HP Motor

* Gear Box : - D: 20:1

* Length : - 53 Ft

* Power Pack Set. : - 2 H.P Power Pack.

* Gob Hopper Cap. : - 20 TONS SILO

(6) CONTROL CABIN

* Cabin Size : - 6.5 * 8 Ft

Product Details:

Four bin feeders attach with each other in an anti-bridging fashion enhances easy and uniform flow of aggregates of different size. Smooth bin wall at valley angles allows free flow of different size aggregates without obstructing it at corners and preventing sticking to other aggregates. Automatic slide gates are provided with each bin for allowing aggregates to fall on conveyor. The aggregate flow from the feeders are operated using variable frequency drive having proportionate controls and high accuracy with great flexibility of operation

Water tank with surge capacity is provided with control valves to operate the flow of water to the mixer along with spray bar. For proper and accurate metering , water flow meter is attached to it. Also a water pump is offered aiding with flexible pipe arrangement give an extra emphasis.

Twin shaft type mixer is used for simultaneous mixing of different size aggregate along with additives. Paddles of mixer are made from high quality steel alloy that ensures it extended life and wear resistant quality. The shaft of paddles is mounted on tough bearings having anti-friction quality for uniform functioning of plant. The liners used here are resistant to wear and tear hence it has low maintenance cost.

According to the plant capacity, storage silo are provided with clamshell gates having fast and easy opening and hydraulically operated. This facilitates quick discharge of mixed aggregate. It is easy to transfer and to erect.

The surge hopper arrangement allows discharge into trucks without any obstruction and spillage. Hydraulically operated clamshell gates open across the entire width of the hopper, preventing segregation of the mixed aggregate and easy transfer of mix.

The automatically operated control panel with weather protected cabin allows easy operation of the plant. The precise and sequential steps in the panel ensure accurate control over the whole process.

Product Details:

INTRODUCTION

COMPONENTS AND FEATURES

This wet mix macadam plant provides high quality mixture of granular and sub base with dynamic control over

production costs. It resolves biggest challenge of providing good base at uneven sites and hence it is

engineering in a way that yields best quality build for the further structure.

Uniform mixing of aggregates, accurate blending, proper discharge of product without any segregation and

binding of additive are the main objectives kept in mind while designing this road construction equipment.

High quality steel parts and other quality base tough structure makes it strong and reliable.

This WM series can successfully provide cold mix, emulsion treated mixes, and lime/cement treated aggregate

base mixes. The WMM plant provide advance process controls and automation, latest and proven technical

solutions, plant installation at site with fully system support.

Complete range of models available with rated Capacity is 60 – 200 TPH

Four bin feeders attach with each other in an anti-bridging fas hion enhances easy and uniform flow of aggregates

of di_erent size. Smooth bin wall at valley angles allows free flow of di_erent size aggregates without obstructing

it at corners and preventing sticking to other aggregates. Automatic slide gates are provided with each bin for

allowing aggregates to fall on conveyor. The aggregate flow from the feeders are operated using variable frequency

drive having proportionate controls and high accuracy with grea t flexibility of operation

COLD BIN FEEDER

Water tank with surge capacity is provided with control valves to operate the flow of water to the mixer along

with spray bar. For proper and accurate metering , water flow me ter is attached to it. Also a water pump is o_ered

aiding with flexible pipe arrangement give an extra emphasis.

WATER TANK & METERING

Twin shaft type mixer is used for simultaneous mixing of di_erent size aggregate along with additives. Paddles of

mixer are made from high quality steel alloy that ensures it extended life and wear resistant quality. The shaft of

paddles is mounted on tough bearings having anti-friction quality for uniform functioning of plant. The liners used

here are resistant to wear and tear hence it has low maintenance cost.

PUG MILL MIXER

According to the plant capacity, storage silo are provided with clamshell gates having fast and easy opening and

hydraulically operated. This facilitates quick discharge of mixed aggregate. It is easy to transfer and to erect.

Additional Information:

• Item Code: FABHIND-WMM-200
• Production Capacity: 200 tph
• Delivery Time: 2 WEEK
• Packaging Details: TRUCK LOAD

Product Details:

FABHIND

WASTE TYRE PYROLYSIS PLANT• MAIN REACTOR 

 Made with  BQ Plate 516-70 GR  Capsule Type (with two site dish end)--2.6 Miter x 6.6  Miter 16 MM Plate Door Size 1500 MM

   FRONT DOOR FRONT SIDE CARBON REMOVAL SYSTEM ATTECHMEN extra Price

• REACTOR COVER 

    Cover 3 MM MS Sheet With insulated cera wool 1260 Temp 25 MM Two layer

• REACTOR ELECTRIC MOTOR 

    Motor -1 Nos 7.5 HP 960 RPM Motor for Process and 2 nd  7.5 HP 1440 RPM Motor ( Standard make )

• REACTOR GEAR BOX

    Heavy Helical Gear Box

•   CONDENSER PIPE UNIT

     MS Pipe 6 Inch -16 Nos For condenser with  2 nos carbon holding Tank 5 MM Thickness.

•  INSULATION TANK

     MS Plate 800 MM x 1550 MM x 5 MM With cerawool insulation and  aluminum sheet

• WATER SEAL TANK

      MS Plate 1000 X 1800 MM X 5 MM with 4" Jacketed For coolant.

• GAS TANK

     MS Plate  800 MM x 1550 MM X 5 MM

• OIL TANK

     MS Plate  2800 X 1350 MM X 5 MM 7.4 KL (3.7 KL -02 Nos )

• WATER COOLANT PIPE

      Water Coolant pipe with Jacketed 5 mm pipe 15 feet ( 8' pipe X 15 feet  & 16" X 10 feet )

• SCRUBBER COOLANT PIPE

     Scrubber Coolant Pipe 10 Inch 5 MM with 1' pipe 10" X 15 Feet

• WET SCRUBBER ROUND TANK FOR DRAFT CONTROL

      Scrubber  Tank(Dust Tank)5 MM MS Plate with coolant pipe 800X2800 mm

• DRAFT- CHIMNEY BLOWER

      Dust Blower with 5 HP 1440 RPM Motor  For chimney                

• STEEL PULING WIRE-ROPE HOIST

      Wire Rope Hoist  with  4" Gear box with 3 HP  Motor and 60 Feet 10 MM  wire rope

• FIRE BRICK & CASTABLE CEMENT 

        Fire Brick & Castable cement  550 Nos Fire Brick and castable cement - 5+5 bags For fire chamber

• CONTROL PENAL BOARD       

       Reactor Control Penal board with digital temp indicator & Presser  penal board With solenoid valve

• SUBMERSIBLE PUMP

     Submersible pump 5 HP "Atlas"  Brand  for water Circulation

• OIL GEAR PUMP

    Oil Gear Pump "Atlas"  Brand 3 HP Gear Pump for Oil transfer

• MUD PUMP 

    Mud Pump "Atlas" Brand 3 HP for water scrubber systems

• DRAFT CHIMNEY 

     Draft Chimney 

• FIRE GAS FIRE BLOWER 

      Fire Gas blower for Reactor Gas burner 

• GAS BURNER 

    Extra Gas burner -2 Nos for Excess Gas Burning

• COOLING TOWER  

      Cooling Tower -Capacity 70 TR -3 HP Motor

• HARDWARE AND FITTING 

Additional Information:

• Item Code: WMM-200-FABHIND
• Production Capacity: WMM-200-FABHIND
• Delivery Time: 2 WEEK
• Packaging Details: LOOSE TRUCK

Product Details:

(1) Four Bin Feeder.

* Bin Size : - 3000 MM * 2250MM

* Bin Feeder Belt : - 2920 *500* 08 MM = 4 Nos

* Bin Feeder Motor : - 2 HP. AC Motor = 4 Nos.

* Drive Gear : - D: 20:1 = 4 Nos.

* Gathering Gear : - D: 20:1 = 1 Nos.

* Gearthing Motor : - 5 HP. = 1 Nos.

* Gearthing Belt : - 600*25500* 8 mm 1 Nos.

* One Bin Vibrate Motor : - 1 HP. = 1 Nos.

* Thickness Plate : - 4 mm Sheet.

* Bin Extention Plate Thickness : 3 mm Sheet

(2) Vibrating Screen.

* Screening Area. : 900mm * 1200mm.

* Screening Size. : 65mm * 65 mm * 8 mm.

* Vibrator Motor. : 1 HP Motor.

(3) Salinger Conveyor Set.

* Conveyer Belt Size : 14400 * 600 * 08 MM

* Motor : 5 HP AC / 1500 RPM.

* Gear Box : D: 5:1 Gear.

* Length : 45 F

(4) Pug Mill Unit.

* Pug Mill Plate Thicknes : - 05 mm

* Pug Mill Liner Plate. : - 08 mm

* Reduction Gear : - 9 * 10: 1

* Pug Mill Motor : - 50 HP / 1500 RPM

* Padester : - UCF – 218

* Chakker : - 54 * 21 = 1 Set.

* Pedalam Tips : - 26 X 2= 52

* Water Pump : - 1.5 H P

(5) Load Out Conveyor Set.

* Conveyer Belt : - 32,000 * 600 * 3Ply.

* Motor : - 10 HP Motor

* Gear Box : - D: 20:1

* Length : - 53 Ft

* Power Pack Set. : - 2 H.P Power Pack.

* Gob Hopper Cap. : - 20 TONS SILO

(6) Control Cabin

* Cabin Size : - 6.5 * 8 Ft